Your browser is no longer supported

For the best possible experience using our website we recommend you upgrade to a newer version or another browser.

Your browser appears to have cookies disabled. For the best experience of this website, please enable cookies in your browser

We'll assume we have your consent to use cookies, for example so you won't need to log in each time you visit our site.
Learn more

Arterial blood gas analysis: Understanding ABG reports

  • Comment

This is the first of a two-part unit on arterial blood gas (ABG) analysis, and focuses on background information and basic interpretation of ABGs where no evident compensation is taking place. It discusses the various components on an ABG report, the normal ranges and the significance of abnormal readings.

  • This article has been double-blind peer reviewed
  • Figures and tables can be seen in the attached print-friendly PDF file of the complete article found under “related files”


Coggon, J.M. (2008) Arterial blood gas analysis 1: understanding ABG reports. Nursing Times; 104: 18, 28–29.Abstract

Jacqueline Mandy Coggon, MSc Critical Care, BSc Health Care Practice, Dip Nursing, ENB 100, RGN
, is clinical educator for critical care, integrated critical care unit, King’s Mill Hospital, Sherwood Forest Hospitals NHS Foundation Trust.

Learning objectives

  1. Describe the components of an ABG report and their ‘normal’ parameters.

  2. Perform a basic analysis of an ABG with only one obvious abnormal parameter, that is, one without evident compensation.

Critically ill patients are not confined to critical care units. Every day, practitioners working in acute areas encounter arterial blood gas (ABG) results, which they may not necessarily be able to interpret. It can be difficult to find time to develop knowledge. However, in light of guidance and policy documents (NICE, 2007; Department of Health, 2000), it is imperative that all nurses working in acute areas can interpret ABGs and ensure patients receive timely and appropriate care.

What is an ABG?

For analysis a small sample of arterial blood (approximately 2ml) is taken from an arterial sampling device (arterial line) situated in an artery, or taken via an intermittent ‘stab’ into an artery. The former method is better for patients if frequent samples are required as it reduces pain and the risk of damage to the artery.

An ABG is typically requested to determine the pH of the blood and the partial pressures of carbon dioxide (PaCO2) and oxygen (PaO2) within it. It is used to assess the effectiveness of gaseous exchange and ventilation, be it spontaneous or mechanical. If the pH becomes deranged, normal cell metabolism is affected. The ABG allows patients’ metabolic status to be assessed, giving an indication of how they are coping with their illness. It would therefore seem logical to request an ABG on any patient who is or has the potential to become critically ill. This includes patients in critical care areas and those on wards who ‘trigger’ early-warning scoring systems. Others who give cause for concern are patients with acute illnesses or exacerbations of conditions and those in the peri-operative and peri-arrest periods.

Transferring the sample to the analyser

In order for the sample to be accurate, it should be analysed within 10 minutes of sampling from the patient (Cornock, 1996). To prevent haemolysis it should be handled gently, avoiding any vigorous shaking. Providing constant agitation by rolling the syringe gently will also prevent plasma separation.

Patient details and percentage of oxygen being administered must be entered along with their identification number. Some machines request patients’ core temperature as it is known to affect the gases dissolved within the plasma, and result in a more accurate reading. However, Woodrow (2004) pointed out that temperature probes can be inaccurate and so entering a temperature of 37ºC for all patients would be better practice.

Information provided by an ABG

Depending on the type of analyser, nurses may receive some or all of the following information, outlined below.

pH and hydrogen ion (H+) activity
The pH scale ranges from 1–14, where 1 is the strongest acid, 14 is the strongest alkali and 7 is neutral. Although the pH may vary slightly within a range and still be considered normal, for the purpose of ABG analysis 7.4 is considered the absolute norm (Pagana and Pagana, 2006). This reading is slightly alkalotic.

The pH of a solution gives information on the potential for it to become hydrogen. When acids are dissolved in water they release free hydrogen ions (H+). The concentration of H+ is far greater in an acid than it is in an alkali and, obviously, the stronger the acid, the more H+ it contains. It is therefore slightly confusing that something with a high potential to become hydrogen has a small number on the pH scale. The reason for this is that the scale is a negative logarithm designed to help understanding of very small numbers with many decimal places. A pH of 1 means that the concentration of H+ in that solution is 0.1. A pH of six denotes that the concentration of H+ in that solution is 0.000001 and a pH of 14 denotes an H+ concentration of 0.00000000000001. It would be impractical to keep writing down all these decimal places, so we tend to refer to the number of zeros as the pH.

For every decrease in the pH by 1, there is a tenfold increase in the number of hydrogen ions. Small changes in pH can create huge problems within the body.

This is the partial pressure of carbon dioxide dissolved within the arterial blood. It is used to assess the effectiveness of ventilation. The normal range for a healthy person is 4–6kPa, although in chronic pulmonary diseases it may be considerably higher and still normal for that patient.

This is the partial pressure of oxygen dissolved within the arterial blood and will determine oxygen binding to haemoglobin (SaO2). It is of vital importance but is not used in determining patients’ acid base status.

The normal range for a healthy person is approximately 10 less than the percentage of oxygen breathed in. For example, we breathe in air, which at sea level contains 21% oxygen, thus the expected SaO2 should be at least 11kPa.

Levels that are higher than normal are usually associated with unnecessarily high levels of supplementary oxygen, while low readings indicate hypoxaemia (Simpson, 2004).

The arterial saturation depends on the PaO2 but also the haemoglobin (Hb). Although similar to SpO2 (measured by a pulse oximeter), it is more accurate. The normal levels are 97% and above, although levels above 90% are often acceptable in critically ill patients.

HCO3 is the chemical formula for bicarbonate, an alkali. It is the main chemical buffer in plasma and alludes to the body’s metabolic status. It is not directly measured but calculated from other values such as the PaCO2, haemoglobin (Hb) and pH using complicated formulas. Some analysers use the standard bicarbonate measurement (SBC). Again this is not measured but is calculated and slightly more accurate than HCO3 as it takes into account bicarbonate produced as a result of respiratory failure (Simpson, 2004).

Several textbooks publish many different normal ranges for HCO3. It is easy to remember the normal range as being in the 20s (mmol/l). If the HCO3 is in the low 20s it might be heading out of range, and if it is in the high 20s this also indicates it is heading out of range. The ideal number would be somewhere in the middle, such as 24, 25 or 26mmol/l.

Base excess (BE)
For many practitioners this is perhaps the most confusing element of the ABG report. Base excess is a surplus amount of base (alkali) within the blood. However, it can be normal to have a small amount of surplus within the blood. When there is no surplus base within the blood, rather confusingly it is reported as a negative base excess. However, this too can be normal. The normal range can be anywhere on the linear scale between –2mmol and +2mmol per litre of blood.

The concept of negative base excess can be explained as follows – imagine there is a conical flask within the body and it stores ‘base’ in case the body might need it. If, for example, the pH falls and the blood becomes acidic, the body will draw on this base, pulling it out of storage and using it to ‘mop up’ the acid. The body now has none in storage, that is, a negative base excess exists.

If the base excess were reported as +1mmol, this means that in theory 1mmol of base needs to be removed per litre of blood to return the pH to 7.4. Conversely, a base excess of –1mmol means that the blood would have a pH of 7.4 if an extra 1mmol of base were added to each litre of blood.

Nurses who find it difficult to understand the concept of double negatives may prefer to use the normal bicarbonate range when analysing ABGs and refer to the BE as a quality control measure. This is because HCO3 and BE work in harmony – they are effectively measuring the same thing. If the HCO3 is out of range and reading high, the BE will also be out of range and reading high (in this case a positive number, greater than 2). If the HC03 is out of range and reading low, the BE will also be out of range and reading low (in this case a negative number, less than –2).

Other parameters

The more sophisticated blood gas analysers are also able to measure lactate, glucose, crude urea and electrolyte levels, Hb and the anion gap. Lactate measurement is a particularly important marker in conditions such as sepsis (Dellinger et al, 2008).

While the focus of this article is on basic arterial blood gas analysis, once they are proficient in this, nurses may study further concepts.

The second part of this unit, to be published next week, outlines the various compensatory mechanisms the body uses.

Key references

Dellinger, R.P. et al (2008) Surviving Sepsis Campaign: International guidelines for management of severe sepsis and septic shock. Critical Care Medicine; 36: 1, 296–327.

NICE (2007) Acutely Ill Patients in Hospital: Recognition of and Response to Acute Illness in Adults in Hospital.

Pagana, K.D., Pagana T.J. (2006) In: Ruholl, L. (2006) Arterial blood gases: analysis and nursing responses. Medsurg Nursing: Official Journal of the Academy of Medical-surgical Nurses; 15: 6, 343–349.

Simpson, H. (2004) Interpretation of arterial blood gases: a clinical guide for nurses. British Journal of Nursing; 13: 9, 522–527.

Woodrow, P. (2004) Arterial blood gas analysis. Nursing Standard; 18: 21, 45–52.

  • The full reference list for this unit is available in the corresponding Portfolio Pages

  • Comment

Have your say

You must sign in to make a comment

Please remember that the submission of any material is governed by our Terms and Conditions and by submitting material you confirm your agreement to these Terms and Conditions. Links may be included in your comments but HTML is not permitted.